| Table size (length x width x height) | 600 x 400 x 680-820mm, with height adjusted to 30mm per level. |
|---|---|
| Desktop | Size 600 × 400mm, using 18mm E1 grade high-density board with double-sided light green color. The four edges are sealed by one-time injection molding without joints. The edge sealing is antibacterial, waterproof and anti-collision |
| Table bucket | Single layer one-time molding table bucket, with a height of 150mm, a width of 450mm, and a depth of 300mm. It is stamped and bent from 0.8mm cold-rolled steel plate; The front part has been treated with rolled edges and reinforced with internal ribs |
| Table legs | The single column table legs and single horizontal pipes are made of steel pipes with dimensions of 25mm × 50 * 1.2mm. The upper part of the table is made of elliptical welded pipes with dimensions of 20mm × 40mm × 1.2mm, and is equipped with high-quality ABS plastic black rubber sleeves |
| Chair size (length x width x height) | 380 x 405 x (420-460) mm, armchair |
| Seating board | The size of the seat board is 380 × 380mm, and the backrest size is 250 × 405mm. It is made of HDPE hollow blow molding material and is injection molded in one go according to the principles of human spine. The backrest is concave, which can support the back spine of growing middle school children well, avoiding side bending. The backrest is designed with handles, making it easy for students to move and clean. It is impact resistant, pressure resistant, and wear-resistant. The backrest tube is reinforced with ribs for a more aesthetically pleasing appearance |
| Chair legs | Both the single column chair legs and the single horizontal tube are made of steel pipes with dimensions of 25mm × 50 * 1.2mm. The upper part of the chair is made of elliptical welded pipes with dimensions of 20mm × 40mm × 1.2mm, and is equipped with high-quality ABS plastic black rubber sleeves. All iron parts are fully welded around the perimeter, with a sturdy structure that will not shake or loosen even after long-term use |
Contact Us Now!
C-shaped desks and chairs CT-FS001
| Table size (length x width x height) | 600 x 400 x 680-820mm, with height adjusted to 30mm per level. |
|---|---|
| Desktop | Size 600 × 400mm, using 18mm E1 grade high-density board with double-sided light green color. The four edges are sealed by one-time injection molding without joints. The edge sealing is antibacterial, waterproof and anti-collision |
| Table bucket | Single layer one-time molding table bucket, with a height of 150mm, a width of 450mm, and a depth of 300mm. It is stamped and bent from 0.8mm cold-rolled steel plate; The front part has been treated with rolled edges and reinforced with internal ribs |
| Table legs | The single column table legs and single horizontal pipes are made of steel pipes with dimensions of 25mm × 50 * 1.2mm. The upper part of the table is made of elliptical welded pipes with dimensions of 20mm × 40mm × 1.2mm, and is equipped with high-quality ABS plastic black rubber sleeves |
| Chair size (length x width x height) | 380 x 405 x (420-460) mm, armchair |
| Seating board | The size of the seat board is 380 × 380mm, and the backrest size is 250 × 405mm. It is made of HDPE hollow blow molding material and is injection molded in one go according to the principles of human spine. The backrest is concave, which can support the back spine of growing middle school children well, avoiding side bending. The backrest is designed with handles, making it easy for students to move and clean. It is impact resistant, pressure resistant, and wear-resistant. The backrest tube is reinforced with ribs for a more aesthetically pleasing appearance |
| Chair legs | Both the single column chair legs and the single horizontal tube are made of steel pipes with dimensions of 25mm × 50 * 1.2mm. The upper part of the chair is made of elliptical welded pipes with dimensions of 20mm × 40mm × 1.2mm, and is equipped with high-quality ABS plastic black rubber sleeves. All iron parts are fully welded around the perimeter, with a sturdy structure that will not shake or loosen even after long-term use |
Company Overview
Certificates
Factory Show
FAQ
What products does the company mainly produce?
Answer: The products cover multiple series such as teaching furniture and school equipment, mainly including:
Desk and chairs: Steel wood desk and chairs (model CT-001), single person steel wood desk and chairs (model CT-0067), etc.
Dormitory furniture: bunk beds/bunk beds (model CT-0067-69), apartment beds, etc.
Other school furniture: dining tables and chairs, classroom chairs, teaching blackboards, etc.
Other products: sports equipment, teaching instruments, laboratory equipment, multimedia equipment, etc
What services can the company provide?
Answer: As a manufacturer, the company provides manufacturing and sales services for teaching equipment, has customization capabilities, and focuses on product research and development, production quality, and after-sales service.
Where is a folding table suitable for use?
Answer: Suitable for various scenarios such as school temporary dining, training institution desks, stall sales, outdoor camping, conference temporary venues, construction site temporary dining tables, household spare tables, etc
评价
目前还没有评价